LED NEON LIGHTS glowing diode neon lights are more environmentally friendly, cheaper, and easy to install, and because-because it is posted on the store door, it does not reach the street, so the safety hazard is small. As far as production is concerned, the cost is also very low. After all, the production process of ordinary neon lights is more complicated and hand -made. It is said that it usually takes more than half a year to learn to master. The old engineer of Hunan Kangbi Technology told us that if you want to do well in LED neon lights, you must have sufficient patience. None of the procedures of various processes must be wrong. Of course, the complex process finished products naturally have more advantages.
The inherent characteristics of LED NEON LIGHTS luminous diode determine that it is the most ideal light source and replaces the traditional light source with a wide range of uses.
1. Small volume.
The light -emitting diode is basically a small chip packed in a resin, so it is very small and light.
2. Low power consumption.
The power consumption of light emitting diode is very low. Generally, the working voltage of the light-emitting diode is 2-3.6V. The working current is 0.02-0.03A. In other words, the electricity it consumes does not exceed 0.1W.
3. Long service life.
Under the appropriate current and voltage, the service life of the light -emitting diode can reach 100,000 hours.
4, high brightness, low calories, environmental protection.
The light -emitting diode is made of non -toxic materials. Unlike fluorescent lamps containing mercury, it can cause pollution, and the light -emitting diode can also be recycled.
5, sturdy and durable.
The light -emitting diode is completely encapsulated in epoxy resin, which is fixed than the bulb and fluorescent lamp. There are no loose parts in the lamp, making LED less easily damaged.
6. High light efficiency: almost all of the spectrums are concentrated on visible light frequency, with an efficiency of 80%-90%. Similar to incandescent lamps, the light effect is only 10%-20%.
7. High light quality: Because there is no ultraviolet and infrared rays in the spectrum, there is no heat and radiation, which is a typical green lighting source.
8. Low energy consumption: The power of the single body is generally 0.05-1W. It can be tailored by the cluster to meet different needs and waste very little. As a light source, the power consumption under the same brightness is 1/8-10 of ordinary incandescent lamps.
9. Long life: The standard life of the optical flux attenuation to 70%is 100,000 hours. Semiconductor lights can generally be used for 50 years. Even people who live a hundred years old can use 2 lamps at most in their lives.
10. Reliable durability: Tungsten wireless wires, glass shells and other easily damaged components. The abnormal scrap rate is small and the maintenance cost is extremely low.
11. Flexible application: small volume, can be packaged in the plane, and it is easy to develop into light and short products, making specific application products in various forms of dots, lines, and surfaces.
12. Safety: The work voltage of the unit is between 1.5-5V and the working current is between 20-70mA.
13. Green environmental protection: waste can be recycled without pollution, unlike mercury like fluorescent lamps.
