China RGB LED strip USB 5v Manufacturers, Suppliers, Factory

In the design of the billiard room, the lighting not only illuminates, but also beautifies the environment and improves the experience. Light strips, as a popular decorative method, have become an important lighting component due to their uniform light source and flexible installation. However, installing light strips is not just "illuminating". Reasonable layout, choosing suitable light strips and ensuring stable work are all key factors.

According to the customer's demand for light color, our company designs a high density 120 leds per meter RGBW led strip light. It uses an engineering working voltage of 24V and is set to a working power of 24W per meter approximately. The width of the led strip light is 12mm, and using a 3 ANSI pure copper double-sided circuit board. Achieve very good results in lighting effect.

When holding an event, lighting design is one of the key factors in creating an atmosphere. LED Light strips have become the preferred decorative tool for many events due to their flexibility and diversity. Choosing the right LED strip lights can not only enhance the visual effect of the event but also bring guests an unforgettable experience. This article will provide a detailed introduction on how to select and use LED strip lighting in different types of activities, as well as some practical purchasing suggestions.

LED neon light-emitting diode neon lights are more environmentally friendly, cheaper, and easy to install, and because they are generally pasted on the store door and do not extend to the street, there are fewer potential safety hazards.

When purchasing COB light strips, many people wonder how many lamp beads should be one meter. In fact, most people have misunderstandings on this issue. This article will analyze the selection of lamp bead density in detail in COB light strips to help you make wise decisions.

In the light strip controller, IR (infrared) and RF (radio frequency) are two common wireless communication methods. The IR controller uses infrared rays, with wavelengths typically ranging from 1um to 100um and frequencies between 300GHz and 400THz. It usually requires a direct line of sight between the transmitter and receiver, meaning there should be no obstructions between them. For instance, like a TV remote control, it needs to be aimed directly at the device to operate. RF uses radio waves, with frequencies typically ranging from 3kHz to 300GHz. It does not require a line of sight and signals can penetrate walls, furniture, and other objects. Therefore, the distance and position restrictions between the controller and the light strip are relatively small. This article will detail other differences between IR and RF in their applications.